Micro Air Grinder (Two Bearing Blue)
|FOB Price:||US $5.7 / Piece|
|Min. Order:||1,000 Pieces|
|Min. Order||FOB Price|
|1,000 Pieces||US $5.7/ Piece|
|Payment Terms:||L/C, T/T, D/P|
- Model NO.: RH-3170B1
- Usage: Carve
- Brand: Rh
- Screwdriver Startup Mode: Hand press
- Customized: Customized
- Collet Size: 1/8′′(3 mm)
- Vent-Pipe: 3/8′′
- Workinh Pressure: 90 Psi
- Type: Micro Air Grinder
- Working Style: Rotary Type
- Degree of Automation: Semi-automatic
- Condition: New
- Free Speed: 54000 Rpm
- Air Inlet Size: 1/4′′
- Air Consumption: 2 Cfm(57 L/M)
1, small and lightweight, good balance for a long time use, not cause fatigue.
2, with high torque of grinding.
3, high speed, stable output.
4, light in weight, durable and save air.
5, ultra quiet, low vibration.
|Free Speed||Collet Size||Air Inlet Size||Vent-pipe||Avg.Air Consumption||Working Pressure|
|54000 rpm||1/8"(3mm)||1/4"||3/8"||57 l/m(2 cfm)||90 psi|
1, all kinds of grinding tools. Precision grinding and level surface grinding after machining process,etc.
2, metal product burr removal, mold edge treatment, small casting grinding, etc..
Scope of application: used for mould engraving, deburring, grinding all kinds of steel structure.
To extend the using life, please note the following:
1, the daily before and after work, dropping 4-5 drops gas oil from the quick connector. Idle a few seconds, make the bearing lubricate sufficiently.
2, to avoid falling, and use improper tool to disassemble.
3, to make the compressed air clean, dry, to prevent dirt and water into the motor.